Product name: Battery Crush Test Machine
Model number: GX-5067-C
crush test method description
Cylindrical or prismatic, bag-shaped, button/coin-shaped cells or
batteries are crushed between two planes which the diameter greater
than 20 mm. Cruh at the first contact point at a speed of about 1.5
cm/s until one of the following three conditions occurs:
The maximum pressure reaches (13±0.78)kN;
Maximum pressure range: 0~20kN (usually 13 kN)
Pressure display accuracy: 0.01N, sensor resolution: 1/100,000;
Power display: high-precision pressure sensing and display through
PLC
Control mode: PLC automatic control mode
Unit Conversion: kg, N, lb
Displacement resolution: 0.05 mm
Testing Speed: 0.01~20mm/s Adjustable
Compression space: 300*300*300mm (width * height * depth)
Machine crush stroke: 200mm
Crush Plate: Dia. 20cm or 15cm Round squeezing board
Battery Placement Platform:
Material for the stainless steel, the middle left a diameter of
20mm puncture hole, easy to puncture, place the platform just below
the electrolyte collection plate, can be collected at any time
during the test leakage, easy to extract the electrolyte;
Lighting Design:
The top of the test chamber is equipped with an LED explosion-proof
lighting, dust, explosion-proof, fire, explosion-proof lamp shell
easy to replace.
Emergency stop:
Squeeze acupuncture machine with "emergency stop" button, easy to
emergency situations in the emergency treatment;
"Emergency stop" button for emergency situations, stop acupuncture
testing machine all the action to prevent the occurrence of harm;
Drive system
Servo control system: the original imported servo motor with servo drive output power,
through the screw drive extrusion head or needle to set the speed
of the battery to the battery. Extrusion / acupuncture speed
adjustable can be set.
Maximum stroke: 300mm.
Test speed: 0 ~ 1.5cm / s (adjustable)
Test force range: 0 ~ 20kN (adjustable can be obvious)
